2024

As the world becomes increasingly more automated, companies worldwide are evolving their automation systems and intelligent robotic technology to boost manufacturing efficiency and reduce time, waste, and cost. ATX West is where these brands meet to connect and showcase industrial machinery, AI, and robotics, and maintenance advancements to provide premier automation solutions for your company.

ATX West is an automated manufacuring event where you can showcase the latest automation and intelligent robotic technology. ATX West 2024 evevnt will help exhibitors to enhance their business efficiency and reduce costs and time for automation processes and robots.

The products displayed on the show floor will help reduce time, waste, and costs and improve manufacturing efficiency.

Engineer your automation journey with ATX West, the pinnacle B2B automation manufacturing trade show in California and beyond. Join engineers, executives, and buyers where the industry's top automation companies collaborate and unveil their cutting-edge product innovations, propelling you into a future of faster, more efficient, and cost-effective manufacturing systems.

Tour an expansive show floor full with over 1,600 booths spanning our five co-located shows. Manufacturing suppliers will be showcasing their latest automated machines, equipment, and technology that redefine the landscape of manufacturing, offering a glimpse into a smarter and more efficient future.

Leading provider of precision metrology automation. DWFritz designs, builds, and supports engineer-to-order high-speed, non-contact metrology solutions and automation systems.

MACH 2024,

The Mach Conference showcases the state of the art of multiscale research in materials, with an emphasis on advancing the fundamental science and engineering of materials and structures in extreme environments.

Extreme loadings trigger key failure mechanisms at a large range of length and time scales. Furthermore, a given extreme environment such as high rate loading is typically coincident with other extremes, such as high temperature, high pressure, and electromagnetism. This presents a particular challenge to design and fabricate materials for these extreme environments, requiring cutting edge multi-physics and multi-scale investigations and predictions.

With this in mind, the Mach Conference is intended to trigger substantial intellectual discussion about the basic mechanical behavior of materials and structures in extreme environments. In the spirit of the Materials Genome Initiative, the conference will include discussions of modeling, experiments and processing of materials. In particular, there will be strong interactions between the academic science community and researchers within government agencies, national laboratories and international institutions.

Mastercam: Booth: 17-330

Access to world-class CAM brand in the Mastercam software suite, the most widely used in the industry. MasterCam provides solutions for designers and NC programmers around the world, in a spectrum of applications including 2-through 5-axis routing, milling and turning, 2- and 4-axis wire EDM, 2D and 3D design and drafting, surface and solid modeling, artistic relief cutting and Mill-Turn.

CGTech was founded in 1988. Since that time, our main software product, VERICUT®, has become the industry standard. With offices worldwide, VERICUT software is used by companies of all sizes, universities/trade schools, and government agencies.

FEIMEC - International Fair of Machine Tools and Equipment, consolidated as one of the largest events in Latin America in the industry. The fourth edition of the event will be held from May 7 to 11, 2024 at the São Paulo Expo, in São Paulo, and will gather more than 65.000 visitors from small, medium and large industries. There will be more than 1.100 national and international exhibitors, who will present their new and main products in an area of more than 80,000m²

FEIMEC are the most event in Latin America for doing business, promoting technology, trends, production and relationships for the industrial sector. It is a fair made especially for you, professional small, medium or large industries.

FEIMEC is a great business platform throughout the year. A real source of new contents, trends and technologies for the industry.

FEIMEC is more than a fair: it is a strategic partner that accompanies you before, during and after the event. Far beyond a face-to-face meeting, FEIMEC offers the digital solution your business needs. Featuring customized options and industry know-how, FEIMEC's digital promotion and outreach solutions help your company close deals, reach new customers, and present products and services to a highly qualified audience.

Read more

Metrologic Group provide the leading end-to end universal metrology software. The Metrolog X4 suite for quality assurance and dimensional analysis for conventional and portable devices and robotics. The software also enables offline program creation and simulation.

Autopar is a trade fair for automotive parts and accessories through the participation of many international exhibitors, this exhibition offers innovative new features and shows trends in the industry. The fair is one of the most important dates in the sector in Brazil.

When does Autopar take place?

Autopar is taking place from 08 May 2024 to 11 May 2024. Autopar is a trade show bienal held in Curitiba. Usually in the month of May.

Where is taking place Autopar?

Autopar takes place in Curitiba, Brazil and is held at Expotrade Convention Center on the street Rodovia Deputado Leopoldo Jacomel 10454 in city.

What other Automobile trade shows are in CuritibaWhat is exhibited in Autopar?

In Autopar there are appointments with national and international exhibitors Automobile, Car accessories, Mechanical components, Automation industry, Car parts, Services, other trade shows in Automobile

Read more

Metrologic Group provide the leading end-to end universal metrology software. The Metrolog X4 suite for quality assurance and dimensional analysis for conventional and portable devices and robotics. The software also enables offline program creation and simulation.

Metrologic Group designs and sells universal 3D measurement software solutions, electronic devices and related services. The company provides innovative industrial solutions for industrial 3D measurements and quality departments.

Metrologic Group’s solutions are designed primarily for the automotive industry, aerospace, industrial manufacturing, consumer products, power generation and the medical industries…

Founded in 1980 in France, Metrologic Group is now a worldwide company with 6 sales offices and 18 certified resellers, covering more than 35 different countries.

BIEMH 2024 – the principal international machine tool exhibition – will return for its 32nd edition on 3rd - 7th June 2024. Over 700 exhibitors will gather at the halls of BEC Bilbao Exhibition Centre to present the latest developments in machine technology and solutions for the most pressing challenges in the sector.

This edition will be a place for us to meet again, to move forward and offer the best smart manufacturing event, in order to help your business become more competitive.

We would like to invite you to meet your suppliers again, to look for new ones and to discover the state-of-the-art technology and most innovative solutions by the best advanced manufacturing brands.

Robotics, automation and digitalization take centre stage

BIEMH 2024, the International Machine Tool Biennial, anticipates an event at the highest level with the confirmed participation, more than four months before its start, of 985 exhibiting firms and more than 2,000 products and equipment. Since its launch last July, the commercial campaign has progressed at a very good pace, with a high rate of repeating businesses from leading manufacturers, importers and distributors.

BIEMH, which will be held for the 32nd time at the Bilbao Exhibition Centre June 3-7, stands out not only for its size, but also for being a global benchmark in innovation, technology, knowledge and business opportunities. Its exhibition space ranges from cutting-edge machinery, tools, accessories and components, to machine tools, metrology and production services. In addition, automation, robotics and digitalization will consolidate their position as a prominent part of the event with a specific exhibition space.

Robotics, automation and digitalization as the epicentre of innovation

Positioned as the benchmark event at national level for robotics, automation and digitalization, BIEMH will act as a catalyst for the latest trends and advances in these sectors, which stand out for their contribution to competitiveness and efficiency in advanced industry.

To this end, visitors will be able to explore the exhibition of products, practical demonstrations and specialised presentations in Halls 4 and 6 of the BIEMH by means of an easy and sectorised route. In addition, in order to facilitate direct contact and encourage interaction between exhibiting companies and visitors, specific activities such as guided tours, networking meetings and other initiatives designed to enrich the experience of all participants will be carried out.

At the same time, with the aim of offering a leading platform to address the challenges and opportunities of the sector, a wide-ranging agenda of BIEMH Talks has been designed, in which, over three days, international experts will be discussing the trends, challenges and solutions in the field of advanced manufacturing.

In addition, in its firm commitment to the development of talent in the industry, WORKinn Talent Hub will provide a space for visitors to explore new job opportunities, establish valuable connections with leading companies and access resources and guidance to enhance their career opportunities in the industrial field.

BIEMH 2024 is organised by AFM, Machine Tool Manufacturers; AIMHE, Machine Tool Importers and Bilbao Exhibition Centre, with the support of SPRI – Basque Government as Institutional Partner.

We hope to see you at BIEMH 2024, the benchmark international machine-tool and advanced manufacturing trade show in Spain

Read more

Metrologic Group provide the leading end-to end universal metrology software. The Metrolog X4 suite for quality assurance and dimensional analysis for conventional and portable devices and robotics. The software also enables offline program creation and simulation.

As the most important manufacturing technology event in Quebec, MMTS is more than a tradeshow. MMTS is an EVENT dedicated to manufacturing! We provide a venue for the manufacturing community to come together to connect and grow. This is a unique opportunity to showcase products, communicate with industry leaders and gain practical knowledge to thrive, evolve and stay competitive.

With keynotes, panel discussions and interactive technology exchanges on the event floor, participants can be sure to connect with other stakeholders on timely topics including sourcing the future workforce, the factory of the future, and government programs driving productivity and innovation along with insights into Quebec’s local manufacturing success stories. Add this together with social and interactive experiences throughout the event and you leave MMTS with the feeling of a productive and valuable investment of your time.

Date/Location
June 18 – 20, 2024
Palais des congrès de Montréal, Montréal, QC

Show Hours
Tuesday, June 18, 2024 (Day 1)
10:00 am - 5:00 pm

Wednesday, June 19, 2024 (Day 2)
10:00 am - 5:00 pm

Thursday, June 20, 2024 (Day 3)
10:00 am - 3:00 pm

The SME ZONE will complement discussion that is taking place on the show floor and offer additional opportunities to engage with experts and like-minded peers.

MMTS offers valuable learning opportunities. Take in Keynotes & Special Presentations or participate in a Knowledge Bar to help you gain a better understanding of some of the industry’s biggest challenges and opportunities and to feed an aspiration to help create a better future.

Read more

CGTech was founded in 1988. Since that time, our main software product, VERICUT®, has become the industry standard. With offices worldwide, VERICUT software is used by companies of all sizes, universities/trade schools, and government agencies.

IMTS – Sept 9-14 - Chicago, IL

IMTS+ is a platform that allows the manufacturing technology community to learn about the personalities that drive the industry, gain insights on new technology, and make connections. Discover the people behind the technology through series shows, exclusive interviews, videos, industry chats, and presentations.
https://www.imts.com/

Monday, September 09, 2024

Read more

CGTech was founded in 1988. Since that time, our main software product, VERICUT®, has become the industry standard. With offices worldwide, VERICUT software is used by companies of all sizes, universities/trade schools, and government agencies.

Leading provider of precision metrology automation. DWFritz designs, builds, and supports engineer-to-order high-speed, non-contact metrology solutions and automation systems.

Metrologic Group provide the leading end-to end universal metrology software. The Metrolog X4 suite for quality assurance and dimensional analysis for conventional and portable devices and robotics. The software also enables offline program creation and simulation.

Dimensional Control Systems is a leading provider of dimensional quality management software and on-site engineering services. DCS’s software solutions and engineering services give corporations the toolset for improving and validating their design prior to cutting any tools, reducing scrap, rework, downtime, and non-conformance issues.

The International Manufacturing Technology Show, which runs from Sept. 9 – 14 at Chicago’s McCormick Place. IMTS is the largest manufacturing technology show in North America. More than 1.21 million sq. ft. of exhibit space representing 1,815 exhibitors, the show features digital technologies that offer the fastest and most efficient means of solving the challenges faced by manufacturers and their suppliers.

Booth # : 135600 (East Building, Level 3)

More about IMTS

Cimatron Since 1982, Cimatron® has provided toolmakers with an end-to-end solution for designing and manufacturing tools including molds, dies, and electrodes, as well as programming any CNC and EDM machine for molds, dies, plates, and discrete manufacturing. While Cimatron is at its most powerful when used as a fully-integrated system, it also provides standalone solutions for faster quoting, tool design, electrode creation, and NC programming.

More about Cimatron

GibbsCAM integrates with all major CAD systems and supports 2D to 5-axis milling, turning, multi-task machining (MTM), and wire-EDM. Our toolpaths and post-processors increase the efficiency of production machine shops.

More about GibbsCAM

McCormick Place in Chicago, Illinois.

AMT – The Association For Manufacturing Technology represents U.S.-based providers of manufacturing technology – the advanced machinery, devices, and digital equipment that U.S. manufacturing relies on to be productive, innovative, and competitive. Located in McLean, Virginia, near the nation's capital, AMT acts as the industry's voice to speed the pace of innovation, increase global competitiveness, and develop manufacturing's advanced workforce of tomorrow. With extensive expertise in industry data and intelligence, as well as a full complement of international business operations, AMT offers its members an unparalleled level of support. AMT also produces IMTS – The International Manufacturing Technology Show, the premier manufacturing technology event in North America.

Committees: AMT’s committees and product groups represent the voice of our membership. Committees are the driving force behind all of AMT’s programs, products, and services.

Media and Event Sponsorship: Sponsors are valuable partners in our events and media. Sponsoring AMT's media offerings and events puts your brand in front of leading OEMs and distributors in the manufacturing technology industry.

2024 National Metalworking Reshoring Award: The manufacturing industry cultivates excellence, and we proudly recognize and celebrate leading companies and individuals. The 2024 National Metalworking Reshoring Award is one of the key awards we support.

Read more

Access to world-class CAM brand in the Mastercam software suite, the most widely used in the industry. MasterCam provides solutions for designers and NC programmers around the world, in a spectrum of applications including 2-through 5-axis routing, milling and turning, 2- and 4-axis wire EDM, 2D and 3D design and drafting, surface and solid modeling, artistic relief cutting and Mill-Turn.

42nd Motek | 8 to 11 October 2024 | Messe Stuttgart
Intelligent solutions diversity in the fields of production and assembly automation, feed technology and material flow, rationalisation through handling technology and industrial handling.

The dates for the next trade fair highlight for industrial manufacturing companies are firmly scheduled: the 42nd Motek international trade fair for automation in production and assembly, together with the 17th Bondexpo international trade fair for bonding technology, will take place in Stuttgart from the 8th through the 11th of October, 2024. “Anyone from the manufacturing industries looking to automate a process or function, regardless of the sector, will find the right components and solutions at Motek/Bondexpo,” says Rainer Bachert, longstanding project manager for Motek/Bondexpo at trade fair promoters P. E. Schall. “The exhibitors are suppliers and manufacturers of components, products, modules and complete systems for economical and sustainable automation in production and assembly. They provide manufacturing companies with all the solutions they need to meet the challenges posed by industrial operations,” explains Bachert. “Large numbers of exhibitors have been registering in recent weeks in order to nail down their preferred locations.”

Read more

Metrologic Group provide the leading end-to end universal metrology software. The Metrolog X4 suite for quality assurance and dimensional analysis for conventional and portable devices and robotics. The software also enables offline program creation and simulation.

Mercopar is the largest innovation and business fair in Latin America, a space for building relationships, disseminating knowledge about industry trends, and stimulating economic activity. For over 30 years, the fair has been on a mission to bring together national and international companies, connecting small, medium, and large organizations.

The fair aims to generate business, open new markets, and showcase trends and technologies for industry innovation. Since 2019, the fair has been held in partnership with FIERGS - the Federation of Industries of the State of Rio Grande do Sul, which has expanded opportunities and integration among participants, exhibitors, and partners. Furthermore, the event has shifted its focus to the theme of industrial innovation.

Mercopar is the largest innovation and business fair in Latin America, it is a space for generating relationships, disseminating knowledge about industry trends and stimulating the economy. And just like business, it happens every month of the year. The fair lasts four days, but the industry lives all year round.
A network, an environment to share ideas and do business, an opportunity to be face-to-face with other players in the segment, a platform to drive innovation and develop companies in Rio Grande do Sul: Mercopar is also all of this.
Connecting small and large industries to generate business all year round.
Courses, lectures and content designed exclusively for the industry.
Development of the industry community to enhance networking between the sector.
As the largest industrial innovation fair in Latin America.
Much more than a fair, Mercopar is a community. And you can be part of it all year round.

Take advantage of the best opportunities for the industry. From January to January, connect with buyers and sellers of your products, access videos, data and studies about the industry in addition to other business opportunities.

Read more

Metrologic Group provide the leading end-to end universal metrology software. The Metrolog X4 suite for quality assurance and dimensional analysis for conventional and portable devices and robotics. The software also enables offline program creation and simulation.

One of the top-ranked international plastics trade fairs, Fakuma covers a comprehensive range of products and services involving all aspects of injection molding, extrusion and thermoforming technology. At Fakuma, you will learn the latest in plastics processing whether raw materials, processing machines, peripherals, automation solutions or C-technology.

• You’ll experience the latest, most efficient and currently most sustainable cutting-edge technologies for the plastics processing industry live at Fakuma.
• As soon as you arrive at the exhibition centre, you’ll enter into a direct technical exchange with a unique and highly specialised expert community.
• Comprehensive solutions for various production requirements, a broad range of materials and functionally integrative design solutions will be presented and explained to you in the modern, bright exhibition halls.
• The fast-paced plastics market necessitates an ongoing competitive know-how update on the part of all players, which is only available in such a complex andconcise format at specialised trade fairs.
• You’ll experience technical innovations and digital trends with all of your senses at the event, from which your business will undoubtedly gain new ideas and impetus.
• There’s no substitute for personal, face-to-face meetings and Fakuma is an indispensable centre for the practical exchange of information within the industry.
• The strong sense of community on a professional level – which characterises the atmosphere at Fakuma – promotes intensive dialogue at the extensively equipped, ideally laid out trade fair booths.
• Valuable, long-lasting business relationships always evolve at the event.
• And thus exhibitors, expert visitors, media representatives, associates and colleagues are especially looking forward to this year’s Fakuma where Germany, Austria and Switzerland come together, and where numerous technology leaders from the injection moulding industry are at home.
• A differentiated thematic concept ensures major benefits for expert visitors.

Booth # : nn

Website : https://www.fakuma-messe.de/en

Read more

Since 1982, Cimatron® has provided toolmakers with an end-to-end solution for designing and manufacturing tools including molds, dies, and electrodes, as well as programming any CNC and EDM machine for molds, dies, plates, and discrete manufacturing. While Cimatron is at its most powerful when used as a fully-integrated system, it also provides standalone solutions for faster quoting, tool design, electrode creation, and NC programming.

This event showcases products like manufacturing tools, measuring gauge, tools of paint, truck. Handling spreaders, tools installation, facilities of handling spreaders, tools bonding, facilities for lifting and handling, computer machines, cutting tools and many more.

There will be the manufacturers and designers, wholesalers, owners of industrial plants, software and hardware industries etc. There will be diversified trade and skills like machine tools, measurement, thermal treatment and surfaces, sheath metal, cutting, folding, assembly, electronics, plastic composites etc.

The fair attracts visitors and exhibitors from various industrial sectors and serves as an important meeting point for contractors from all industrial branches. It offers demonstration and handling workshops, meetings with professionals, and conferences, serving as a platform for exchange and discussion for industry experts.

The SIANE Industries Fair in Toulouse not only showcases the industrial diversity and innovative strength of the region and the country but also plays a key role in the economic development of the Midi-Pyrénées region. It highlights the driving forces of new industrial growth, promotes the attractiveness of sectors and the modernization of means of production, and connects these aspects with the energy transition.

Read more

Metrologic Group provide the leading end-to end universal metrology software. The Metrolog X4 suite for quality assurance and dimensional analysis for conventional and portable devices and robotics. The software also enables offline program creation and simulation.

DESCRIPTION
SAVE THE DATE: At EuroBLECH, manufacturers and suppliers of materials, machines, tools and systems meet with trade visitors whose requirements for innovative equipment are substantial. In order to align their production to the complex demands of smart manufacturing, visitors to EuroBLECH specifically look for flexible and cost-efficient solutions in order to operate successfully in the future.

EuroBLECH 2024 will be occupying halls 11, 12, 13, 14, 15, 16, 17, 26 and 27 at the Hanover Exhibition Grounds in Germany.

The halls are being allocated by technology sectors as per the clearly structured exhibition profile.

New since EuroBLECH 2022, hall 26 hosts exhibitors of joining technology, as well as surface and tool technology, which were previously located in hall 13.

Booth # : follows

Website : https://www.euroblech.com/en-gb/about.html

Read more

SigmaTEK Systems is the leading global provider of innovative end-to-end CAD/CAM software solutions to help professional fabricators increase ROI by optimizing material utilization, machine motion, manpower, and data management. SigmaNEST empowers customers in all major industry sectors with a machine-agnostic approach, an integrated platform, and a worldwide team of experienced product experts.